Analyze Soil and Water

To manage the soil well, you first have to know it.

Request advice today.

No two soils are the same. Texture, pH, organic matter, conductivity and available nutrients vary from one plot to another, and sometimes within the same plot. Without that basic information, any decision about irrigation, fertigation or amendments is just an estimate. With a soil and water analysis, it is an informed decision.

The real problem

Irrigating and fertilizing without knowing the soil is like cooking without knowing the ingredients.

Soil is the medium where the crop lives. Its texture determines how much water it retains and how quickly it loses it. Its electrical conductivity reflects the concentration of salts that can affect root absorption. Its pH conditions the availability of nutrients. Its organic matter influences biological activity and the capacity to retain water and nutrients.

Managing a crop without knowing these characteristics is possible, but inefficient. Irrigation protocols, fertilization plans and sensor alert thresholds are designed much better when the real starting point of the soil is known.
The same applies to irrigation water: its conductivity, pH and mineral composition determine how it affects the soil and the crop with continued use.

What the analysis includes

A complete X-ray of your soil and your irrigation water.

Soil analysis

Plantae’s soil analysis includes determining texture and particle size according to the USDA classification, pH in water, electrical conductivity, oxidizable organic matter, and the main macronutrients: nitrogen, phosphorus and potassium. Based on the results, the team prepares observations and recommendations for soil management and for sensor configuration.

Irrigation water analysis

Irrigation water has its own composition: conductivity, pH, bicarbonates, calcium, magnesium, sodium and other ions that, with continued use, can affect soil structure and nutrient availability for the crop. Knowing its composition allows you to anticipate salinity problems, adjust fertigation and take preventive measures.

How it is used to configure the sensors

The soil analysis results are the basis for correctly configuring the algorithms of Plantae sensors: moisture thresholds, reference conductivity ranges and alert parameters are adjusted according to the type of soil and crop. A well-configured sensor provides much more useful information than one with generic parameters.

How we do it with Plantae

The analysis as the starting point for everything else.
Soil and water analysis is the first step to getting the most out of Plantae sensors. With the analysis results, the team correctly configures the devices and defines the most suitable alert thresholds for your farm.

Humidity Sensor

Continuous monitoring of the water status of the analyzed soil.

Conductivity Sensor

Monitoring salinity based on the analysis results.

Particle Sensor

Conductivity of the soil solution at points of interest.

Satellite Image

Identification of heterogeneous zones where soil should be sampled.

Who this solution is for

For those who want to start with well-configured sensors from day one.

New sensor installations
Soil analysis is the recommended preliminary step before installing Plantae sensors. The analysis data allow the algorithms and alert thresholds to be correctly configured from day one, without having to adjust them blindly during the first season.
Farms with salinity or nutrition problems
If the crop shows signs of stress that could be related to salinity problems, nutrient deficiencies or inadequate pH, soil and water analysis is the first step to identify the cause and define corrective measures.
Farms with heterogeneous soils
In plots where the soil varies significantly between zones, analyzing different points makes it possible to understand that variability and design an irrigation and fertilization strategy differentiated by zone.

FAQs

What we are usually asked.

It is not mandatory, but it is highly recommended. With the analysis data, the team can better configure the sensor algorithms and alert thresholds, which improves the quality of the information from day one.
The Plantae team indicates the sampling protocol according to the type of farm. In some cases the team itself is responsible for taking the samples; in others, it is done with assistance.
The Plantae team interprets the results and prepares specific recommendations for soil management and sensor configuration. You do not receive just a laboratory report: you receive a diagnosis with practical guidance.
Yes. Soil and water analysis is an independent service that can be contracted even if sensors are not installed immediately.
The price varies according to the number of samples and the parameters analyzed. Contact the team to receive a quote tailored to your case.

Know your soil before asking anything of your crops.

Tell us what crop you have and in which area your farm is located. We will explain which analyses you need and how we help you interpret them.