Solar Radiation Sensor

How much light your crop receives. The missing data to close the irrigation cycle.

Request advice today.
Plantae’s Solar Radiation Sensor measures the global solar radiation received at the installation point: the sum of direct, diffuse and reflected radiation. It is the key data for calculating the crop’s potential evapotranspiration and adjusting irrigation based on actual solar energy, not generic tables.

Technical specifications

Technical specifications of the Plantae® Solar Radiation Sensor

ParameterValueDetail
Type of measurementGlobal radiationSum of direct, diffuse and reflected radiation.
Spectral response400–1,100 nmCovers the visible and near infrared range.
Range0–1,800 W/m²Covers full-sun conditions at any latitude.
Accuracy±5%Individually calibrated under natural light.
Operating temperature−40 °C to 65 °CSuitable for extreme weather conditions.
MaterialUV ABS plasticResistant to ultraviolet radiation.
Dimensions51 × 70 × 57 mmWeight: 75 g.
TransmissionLoRa RFUp to 500 m to the Hub/Receiver/Station.
Key unitsW/m² · PFD · DLIIntensity, photon flux and daily light integral.
Type of measurement
Global radiation
Sum of direct, diffuse and reflected radiation.
Spectral response
400–1,100 nm
Covers the visible and near infrared range.
Range
0–1,800 W/m²
Covers full-sun conditions at any latitude.
Accuracy
±5%
Individually calibrated under natural light.
Operating temperature
−40 °C to 65 °C
Suitable for extreme weather conditions.
Material
UV ABS plastic
Resistant to ultraviolet radiation.
Dimensions
51 × 70 × 57 mm
Weight: 75 g.
Transmission
LoRa RF
Up to 500 m to the Hub/Receiver/Station.
Key units
W/m² · PFD · DLI
Intensity, photon flux and daily light integral.
Three measurement units for different uses

The sensor provides radiation in three complementary units: W/m² to assess instantaneous intensity, PFD (µmol/m²/s) for the flux of photons active for photosynthesis, and DLI (mol/m²/day) for the daily integral of useful light received by the crop.

How does it work?

Simple installation. Radiation data from day one.

01

Field installation
The sensor is installed outdoors, facing the sky with no obstacles casting shade. It does not require wiring and transmits data via LoRa to the receiving Hub. It is directly integrated into the Plantae weather station together with the thermo-hygrometer, rain gauge and anemometer.

02

Continuous measurement of global radiation
The high-precision silicon photodiode continuously measures global solar radiation. The housing is designed to minimize internal heating by convection, ensuring accurate readings even under high solar radiation conditions.

03

Integration into Plantae Manager
Radiation data are displayed in Plantae Manager together with temperature, relative humidity, rainfall and wind. Combining all these data makes it possible to calculate potential evapotranspiration with real data from your plot.
Plantae Manager

Solar radiation integrated with the rest of the climate data.

Radiation sensor data are displayed in Plantae Manager in real time together with the rest of the meteorological variables. From the dashboard you can:

  • View the solar radiation curve throughout the day and compare days or periods.
  • Check the accumulated daily light integral (DLI) to manage the crop’s light balance.
  • Cross radiation data with temperature and humidity to calculate evapotranspiration.
  • Access from PC, tablet or smartphone.

Add solar radiation to your Plantae weather station.

Tell us which sensors you already have installed and which crop you manage. We help you assess whether the radiation sensor adds value in your specific case.

Use cases

For those who need to close the irrigation cycle with solar energy data.

Calculation of actual evapotranspiration
Potential evapotranspiration (PET) determines how much water the crop and soil lose through transpiration and evaporation. Calculating it with actual radiation, temperature and relative humidity data from your plot is much more accurate than using tables or external station data, which allows you to adjust irrigation more efficiently.

Light management in greenhouses
In greenhouses with artificial lighting or shading nets, knowing the actual solar radiation reaching the crop allows you to decide when to activate supplementary lighting, when to deploy or remove nets, and how to balance natural and artificial light to optimize growth.

Monitoring photosynthesis and crop development
Solar radiation is the engine of photosynthesis. The daily light integral (DLI) accumulated over the season is directly related to the crop’s biomass production. Monitoring this data allows you to compare seasons, identify periods of light deficit and adjust crop management.

Other Plantae® sensors and solutions

Conductivity Sensor

Control soil salinity and optimize fertigation.

Surface Temperature Sensor

Anticipate frosts and thermal events

Solution: Knowing my soil moisture

For the farmer who wants to understand what is being measured and how to interpret it.

Conductivity Sensor

Control soil salinity and optimize fertigation.​

Temperature Sensor

Anticipate frosts and thermal events ​

Solution: Deciding when and how much to irrigate ​

Irrigation decision-making with real-time data.

Rain gauge

Actual rainfall in your plot. Liters per square meter per event.

Anemometer

Wind speed and direction.

RH and Ambient T Sensor

Air temperature and humidity. Thermal integral, chill hours, VPD and leaf wetness.

Knowing the climate on my farm

All the climate data from your plot in a single dashboard.

FAQs

Frequently asked questions about the solar radiation sensor.

W/m² measures the total intensity of radiation at a given moment. PFD (µmol/m²/s) measures the photon flux in the range active for photosynthesis (PAR, 400–700 nm), which is the most relevant for plant growth. DLI (mol/m²/day) is the daily integral of useful light received, and is the most relevant indicator for comparing days or periods and managing the crop’s light balance.

No. The sensor measures global radiation in the 400 to 1,100 nm range, which includes both the visible spectrum and near infrared. This range determines the energy available for photosynthetic processes and the crop’s thermal balance.
Yes. The radiation sensor is a complementary module of the Plantae weather station, which also includes the thermo-hygrometer, rain gauge and anemometer. It connects to the same Hub and its data are displayed in the same Plantae Manager dashboard.
It depends on the use. For precise calculation of evapotranspiration or for light management in greenhouses, the radiation sensor is the key complement. If your goal is mainly to monitor temperature, humidity or rainfall, it may be sufficient without it.
Contact the team to receive a quote tailored to your configuration.