Fruit / Tropical

Avocado, citrus, mango, stone fruit. Crops where climate and soil condition everything.

Request advice today.
Fruit trees and tropical crops are especially sensitive to temperature variations, water stress in critical stages of the cycle, and soil salinity. Plantae works with peach trees, nectarines, cherry trees, avocados, citrus, mangoes and other fruit trees on farms throughout Spain, Portugal and several Latin American countries.
Why fruit trees need data

In fruit trees, timing matters as much as quantity.

In stone fruit, tropical crops or crops with demanding fruit set, irrigation at critical moments of the cycle can be decisive for yield and quality. A water deficit during flowering can reduce the percentage of fruit set. Excess water during ripening can dilute soluble solids and affect the organoleptic quality of the fruit.

On top of that is the risk of late frosts in spring, especially in early-flowering fruit trees such as peach or cherry. Without in-field temperature monitoring, the response depends on general weather forecasts, which do not reflect the actual conditions of each plot.

What we monitor in fruit trees

Phase-based irrigation, real-time temperature and sector-based management.

Soil moisture adapted to the stage of the cycle
The water needs of the fruit tree are not the same during flowering, fruit enlargement or ripening. With continuous moisture data, the technician can adjust the irrigation protocol to each phase of the cycle, keeping the soil in the optimal range for each moment.

Frost prevention with automatic alerts
The surface temperature sensor continuously monitors in-field temperature. When it drops below the threshold set for the crop, it sends an automatic alert to the farmer’s or technician’s mobile phone so they can activate anti-frost systems or take preventive measures in time. In areas with a risk of late frosts, that response capability can save an entire harvest.

Conductivity in crops sensitive to salinity
Avocado and some citrus crops are especially sensitive to the soil’s electrical conductivity. In areas with high-conductivity irrigation water, salinity control is critical. The sensor detects salt build-ups before they become visible in the plant.

Flow control by sector
On farms with several sectors or with trees at different stages of development, the flow meter makes it possible to verify that water reaches each area with the correct flow rate and to detect differences between sectors that may be affecting crop development.

Use case

Documented results in stone fruit.

Peach in loam soil — saving 2/3 of irrigation water
A farmer growing peaches compared two irrigation strategies on the same soil. Using data from probes at 20 and 40 cm and the flow meter, they went from daily irrigations of 3.2 hours to events of 1.3 hours, maintaining the same soil wetting. The change meant an approximate saving of two thirds of the water applied, with the resulting savings in energy, fertilizers and water cost.
Configuration: 1 Hub + 2 probes at 20 and 40 cm (moisture, conductivity, temperature) + flow meter
Investment: €1,298 in year 1 (installation and soil analysis included). €379 annual renewal.

Fruit and tropical crops we work with

From the Mediterranean to the tropics.

Stone fruit
Peach, nectarine, apricot, cherry, plum and flat peach. Early-flowering crops that are especially vulnerable to late frosts and with high water requirements during fruit enlargement.
Tropical and subtropical fruit trees
Avocado, mango, cherimoya, persimmon, papaya. Crops with high sensitivity to soil salinity and with relatively stable temperature needs for fruit set and fruit development. Plantae works with avocado farms in Málaga, Granada and Valencia, and with citrus along the entire Mediterranean coast.
Citrus
Orange, lemon, mandarin, grapefruit. Crops with staggered production and high water demand in summer. Conductivity control is especially relevant in areas with highly mineralized water.
Other fruit trees
Apple, pear, walnut, persimmon, pomegranate, fig. Each species has its particularities in terms of water needs, cold sensitivity and phenological requirements. Plantae customizes the sensor configuration for each case.

Related products and solutions

The most used in fruit trees.

Humidity Sensor

Monitoring of the soil water status in the root zone.

Surface Temperature Sensor

Automatic alerts in case of frost risk during flowering and budburst.

Conductivity Sensor

Salinity control. Especially critical in avocado and citrus.

Flow meter

Verification of flow rate by sector and control of applied water.

Relative Humidity and Ambient Temperature Sensor

Thermal integral and phenological monitoring.

FAQs

What they ask us about fruit trees.

Yes. The conductivity sensor is especially useful in these situations, as it allows you to monitor how soil salinity evolves throughout the season and detect build-ups before they exceed harmful thresholds for avocado.

Yes. Temperature alerts are configured in Plantae Manager by the technician or the farmer themselves. When the sensor detects a temperature below the defined threshold, it sends an automatic notification to the mobile phone or computer.
Yes. With continuous moisture data it is possible to design and implement controlled water deficit strategies in the desired phases — for example, to improve quality and sugar concentration in table fruit or for winemaking. The data show exactly how far moisture drops before each irrigation.
A basic installation for stone fruit with hub, two probes and flow meter starts from €1,298, including installation and soil analysis. The annual renewal is €379.