Flow meter

Know exactly how much water you are applying. And whether your irrigation system is working properly.

Request advice today.
The Plantae Flow Meter records the start and end of each irrigation, the liters applied and the total duration, and compares it with the theoretical flow rate of your installation. It detects deviations, identifies failures in the system and cross-checks that data with the actual soil moisture.

Technical specifications

Technical specifications of the Plantae® Flow Meter

ParameterValueDetail
Measurement principleSingle-channel counterDry dial with IP68 protection.
Compatible diameter16 to 200 mmdripper holders, arches, sector pipes, and so on, allowing us to adapt to any diameter.
Data transmissionLoRa RFUp to 500 m to the Hub/Receiver/Station.
RecordingAccumulated m³Liters applied, start, end and duration of each irrigation.
Flow deviation% calculatedComparison between theoretical flow and actual flow.
CompatibilityUniversalAny drip, sprinkler or sector irrigation system.
DigitizationPulse counterCompatible with existing analog flow meters.
IntegrationPlantae ManagerData cross-checked with subsurface moisture graphs.
Body materialPlastic / Cast ironLength without fittings: 110–130 mm (16–20 mm model).
Measurement principle
Single-channel counter
Dry dial with IP68 protection.
Compatible diameter
16 to 200 mm
dripper holders, arches, sector pipes, and so on, allowing us to adapt to any diameter.
Data transmission
LoRa RF
Up to 500 m to the Hub/Receiver/Station.
Recording
Accumulated m³
Liters applied, start, end and duration of each irrigation.
Flow deviation
% calculated
Comparison between theoretical flow and actual flow.
Compatibility
Universal
Any drip, sprinkler or sector irrigation system.
Digitization
Pulse counter
Compatible with existing analog flow meters.
Integration
Plantae Manager
Data cross-checked with subsurface moisture graphs.
Body material
Plastic / Cast iron
Length without fittings: 110–130 mm (16–20 mm model).

Connection with the Plantae probe hardware

The flow meter does not operate independently: it connects to the Plantae probe hardware already installed, which manages data transmission to the Plantae Manager dashboard. This means that to install the flow meter you must have at least one Plantae probe in the same area or sector. The integration allows you to view flow data alongside moisture, conductivity and temperature data in a single dashboard.

How does it work?

Direct installation in your irrigation system, data instantly.

01

Installation in the irrigation line

The flow meter is installed in the dripper holder, the arch or the sector pipe that you want to monitor, adaptable to diameters from 16 to 200 mm. No construction work or wiring is required: it connects to the Plantae probe hardware, which manages data transmission via LoRa radiofrequency to the receiving Hub with a range of up to 500 meters.

02

Automatic logging of each irrigation
From the moment of installation, the flow meter automatically records each irrigation event: start time, end time, total duration and accumulated liters in cubic meters. There is no need to configure anything manually or be present during irrigation.

03

Analysis in Plantae Manager
Flow data are displayed in Plantae Manager alongside soil moisture graphs. You can review the irrigation history by sector, identify deviations from the theoretical flow rate and cross-check the liters applied with the evolution of moisture to verify whether the water is reaching the root zone as expected.
Plantae Manager

Flow and moisture on the same dashboard.

The flow meter data are displayed in Plantae Manager alongside soil moisture graphs. That combination is what allows you to close the loop: not only knowing how much water you are applying, but also whether that water is reaching where it has to reach and how much of it is retained by the soil.

From the dashboard you can:

  • Consult the irrigation history by sector: start, end, duration and liters applied.
  • See the percentage deviation between the theoretical flow and the actual flow in each event.
  • Cross-check flow data with moisture graphs by depth horizon.
  • Identify consumption patterns and detect anomalies in system behavior.
  • Access from computer, tablet or smartphone, with no additional software.

For the agronomic advisor

The combination of flow and moisture data allows the technician to validate whether the designed irrigation protocol is working as expected and to detect inefficiencies that would not be visible with moisture data alone. It is especially useful when fine-tuning the first season after the system is installed.

Start measuring what your farm irrigates.

Tell us about your irrigation system and the type of installation. We help you assess how to integrate the flow meter into your operation, with no obligation.

Real example

Stone fruit in Jumilla, Murcia.

A stone fruit grower installed the Plantae flow meter together with the soil moisture probes. By cross-checking the data of liters applied with the evolution of moisture at 20 and 40 cm depth, he identified that he was applying more water than necessary to keep the soil at optimal levels.

Based on the data analysis, he adjusted his irrigation protocol by reducing the duration of events from March 29 onwards, while maintaining the same soil moisture trend. The result was a reduction of 30,000 liters per year in water consumption in that sector.

−30,000 l/year

of water saved

−€6,000/year

in irrigation costs

€700/year

cost of the Plantae service

The cost of the Plantae service in that installation was €700 per year. The savings in irrigation costs exceeded €6,000.
Use cases

For any operation with sector-based irrigation.

Drip irrigation with dripper holder

Direct installation on the drip line to monitor water consumption per line or subzone. Especially useful in crops with subsurface drip irrigation, where checking that emitters are working properly without opening the soil is not possible by other means.

Sector control in arch or main pipe

Installation in the arch or sector pipe to obtain the total consumption of each irrigation zone. It allows you to compare flow between sectors, detect differences not justified by the installation design and prioritize maintenance inspections.

Operations with several zones or different crops

On farms with irrigation sectors differentiated by crop, plantation age or soil type, the flow meter allows you to keep an individual record of consumption in each zone and adjust irrigation protocols independently.

Digitization of existing flow meters

If the installation already has analog flow meters, Plantae can integrate them into the digital system via a pulse counter, without needing to replace the equipment. The data are then automatically recorded on the dashboard alongside the rest of the soil variables.

Other Plantae® sensors and solutions

Humidity Sensor

Monitor the water status of the soil at different depths.

Conductivity Sensor

Control soil salinity and optimize fertigation.

Temperature Sensor

Anticipate frosts and thermal events

Solution: Decide when and how much to irrigate

Irrigation decision-making with real-time data.

Humidity Sensor

Monitor the water status of the soil at different depths.

Conductivity Sensor

Control soil salinity and optimize fertigation.

Temperature Sensor​

Anticipate frosts and critical thermal events.​

Decide when and how much to irrigate​

Irrigation decision-making with real-time data.

FAQs

It records the start and end time of each irrigation event, the total duration and the accumulated liters in cubic meters. It also calculates the percentage deviation between the programmed theoretical flow and the actual flow measured in each irrigation.
Yes. The flow meter connects to the Plantae probe hardware for data transmission to the Plantae Manager dashboard. It does not operate as a standalone device: you must have at least one probe in the same area or sector.
It is compatible with dripper holders, arches and sector pipes in a diameter range from 16 to 200 mm, adaptable to any drip or sprinkler irrigation system. For installations with diameters outside that range or special requirements, the Plantae team evaluates each case.
Yes. Plantae offers the option of connecting existing analog flow meters to the system via a pulse counter, without needing to replace the equipment. The data are then automatically recorded in Plantae Manager.
In Plantae Manager, the irrigation events recorded by the flow meter are displayed overlaid on the soil moisture graphs. This makes it possible to see directly whether the water applied in each irrigation produces the expected response in soil moisture at different depths.
No. Installation is carried out directly on the irrigation line without construction work or wiring. The Plantae team supports the process and confirms the configuration before start-up.
Yes. The flow meter automatically records all irrigation events, regardless of whether irrigation is activated manually or by controller. It does not require any action by the grower during irrigation.

Contact the team to receive a quote tailored to your operation.