Flowmeter for drip irrigation

16-20mm Flowmeter and Main Pipe Flowmeter

Flow meter to control irrigation in the hose or dripper (16-20mm) or in the irrigation sectors (arches). The sensor is fully compatible with any irrigation system. It fits any type of plumbing and is quick and easy to install.. The sensor is fully compatible with any irrigation system. It adjusts to any type of pipe and is quick and easy to install.

For the main pipe flowmeter we offer the possibility to acquire the full ensemble (flowmeter + data transmission probe) or to "digitalize" the existing flowmeter if it has pulse counter.

Rates

Leave us your name and email here and we will send them to you by email right away.

It registers the hours of start and end of each irrigation, the total duration and the litres applied through a single-jet meter. So, it allows you to compare the theoretical flow of the sector with the real flow getting a deviation percentage of the irrigation applied. Very useful when estimating water consumption in the field or possible failure of the irrigation system.

It includes an analogical counter, dry dial, to check water flow on-site.

By correlating the flowmeter's reading with the moisture and subsoil temperature graphs we can design an efficient irrigation routine that respects crop water needs, soil characteristics and water application system.

The flowmeter's case has an IP68 certification and is water and chemical resistant making it compatible with irrigation and the application of plant protection products. Moreover, we offer the possibility to add additional protection to the unit that protect the sensor from condensations or other elements that hamper the readings and their use.

Technical Information of the Flowmeter for irrigation

16-20mm Flowmeter

  • Measuring principle: single-jet meters
  • Counter length without fittings: 110 - 130 mm
  • Body material: Plastic
  • Registration: Dry Dial
  • Protection class dry sphere: IP68 ("Copper Can")
  • Nominal diameter DN (mm): DN15
  • Nominal diameter (inches): 1/2"-3/4"
  • Diameter (mm): from 16 to 20 mm
  • Indicators: cubic meters (m3)
  • Data transmission via radio frequency to the Hub/Station/Receptor up to 700 m

 

Main Pipe Flowmeter

  • Measuring principle: multiple-jet meters
  • IP68 Dial Protection
  • Fittings included or supplied by provider
  • Counter types
    • ZENNER
    • PARALEL WOLTMAN
  • Permanent flow (m3/h) Q3=16-400
  • Diameter (mm): DN40/DN50/DN65/DN80/DN100/DN125/DN150/DN200
  • CE Compliance Certification according to 2014/32/eu regulation (MID)
  • Data transmission via radio frequency to the Hub/Station/Receptor up to 700 m
en_GBEnglish